The boards/steps that are mentioned in the fitguide for the Torklift camper tie downs refers to the steps you sometimes see under truck cabs to make getting in and out of the truck a bit easier. Some call them nerf bars, side steps, tube steps etc.
Let's say you got an 8 foot bed 2021 Chevy Silverado 3500 with side steps, and a factory hitch. You'd want the part # TL44FR and # TL84FR.
If you had a different configuration let me know or follow the link I attached on this page where you... view full answer...
To replace the mounting bracket that came with the TorkLift GlowStep Camper Scissor Steps # TLA7805 you need part # TLA75001.
If you have these steps installed on your truck bed you need the Stow N' Go Mounting Bracket for Truck Bed Campers # TLA7820 instead. view full answer...
The correct replacement tarp for your 1990 454 Chevy SS (C/K) Pickup with a 6-1/2 foot step side bed, is part # EX1620 if you have the Extang BlackMax Soft Tonneau Cover (snap-on) # EX2620. If you have the Extang Tuff Tonno Soft Tonneau Cover (snapless) # EX14620, then the correct replacement tart is part # EX13620. view full answer...
If you are just looking to replace just the front camper tie down anchor plates on your 2012 Dodge Ram 3500 Dually with the 8' bed, step or board and factory hitch you need Replacement Front Anchor Plates for HappiJac Custom Truck Bed Camper Tie-Down System - Qty 2 Item # LC182872
If you are looking to replace the complete front tie down you need HappiJac Custom Tie-Downs for Truck Bed Camper Item # LC236326-205221 view full answer...
We offer replacement vinyl for the TruXedo tonneau covers we sell for trucks like your 2005 GMC Sierra crew cab. The key is identifying the original cover product; that will tell us which replacement vinyl you need. What you'll need to confirm is the truck series (1500, 2500 or 3500) and the bed length, 5-1/2-, 6-1/2- or 8-feet. You can use the linked page to select your series and bed.
Click on the appropriate version to see the tonneau covers that fit the truck. For example, if you have... view full answer...
The replacement cover you are looking for is the Extang Replacement Cover # EX6620. I reached out to my contact at the manufacturer and this is a confirmed fit for your 1993 Chevy stepside truck. view full answer...
The replacement Cover for Extang FullTilt Tonneau Cover with Snaps part # EX5940 fits GM trucks so it would not be a fit for your 2000 Ford F-140.
If you have a 6-1/2 ft bed stepside then you have the Extang FullTilt SL Soft Tonneau Cover part # EX38615 on the 2000 Ford F-150 and the replacement cover is part # EX37615.
If you have a 8 foot bed you have the Extang FullTilt SL Soft Tonneau Cover part # EX38715 on the 2000 Ford F-150 and the replacement cover is part # EX37715. view full answer...
Our most popular bumper that will fit your 2001 Dodge Dakota sport is the, Westin Fey Diamondstep Rear Bumper with Custom Installation Kit # 63000-93800
This product is a sturdy steel replacement bumper that has a diamond tread surface to provide grip as you step into your truck bed. It features built-in hitch ball holes, and has a 3,500-lb capacity. The powder coat finish resists rust and custom mounting kit included.
This Bumper will not fit on Quad Cab models.
I have linked all of... view full answer...
The Westin Diamondstep Replacement Bumper you referenced, part # 66000 includes the bumper only, not the install kit. The bumper plus the install kit is part # 66000-97200.
The bumper is NOT compatible with Ranger Splash Models or vehicles equipped with the OEM hitch.
The install kit includes the mounting brackets and all necessary hardware to attach the brackets to the truck and the bumper to the brackets. If the rear of the truck frame members are still in good shape (not rusted through),... view full answer...
I recommend using the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide - 375 lbs # TLA7804-8000. These are a 4 step system that has glow tape on the steps to help with visibility at night, and the adjustable landing gear help stabilize the steps on un-even ground and they'll work for entry heights between 31" and 42" tall. These aluminum steps are light weight and easy to move up and down, as well as remove during travel, so they're perfect for truck campers.... view full answer...
If you have Westin tube steps # 25-0625 then the replacement mounting brackets and hardware is # 25-062PK.
The tube steps listed above are the correct model for a 1997 Ford F-250 SuperCab. If you have tube steps from a different truck then they are likely not going to fit and/or won't match the brackets that do fit the truck. view full answer...
It looks like you are looking at replacement hardware for steps. If you want the hardware for the Bestop TrekStep Truck Bumper Step # B75300 you asked from, the hardware is not available in a kit. I have attached a photo of each bolt and measurement so you can get what you need from a local hardware store.
If you are looking for brackets like for nerf bars instead, let me know what manufacturer and send a photo of your truck so I can assist. Many of the nerf bar and running board hardware... view full answer...
We do carry many replacement step pads for running boards/tube steps/nerf bars and many of these do resemble each other quite a bit. Since these replacement parts are all brand-specific fits we will need to figure out what brand and what product series boards he has.
The linked page displays all running boards from Westin and DeeZee that fit your son's 2008 Ram 1500 Crew Cab pickup. You can compare the photos on the page to the steps on the truck to determine what brand he has (unless... view full answer...
We have a few bumper options that might be what you're wanting for your 1997 Chevy 1500 but it just depends on the exact style you're looking for:
- Westin Perfect Match Series Rear Step Bumper - Chrome Plated Steel # 31000
- Westin Fey Diamondstep Rear Bumper - Silver Powder Coated Steel # 20008-92230 view full answer...
The Replacement Step Pad for Aries 4" Wide Oval Nerf Bars # AA2090161 are the correct pads for the Aries Oval Nerf Bars # AAS223039-2 on your 2013 Ford F-150. They will have the same design as your current step pads but will not be worn and will have no UV fade. Since they are on opposite sides of the truck this really comes down to a personal preference since they will not be side by side. view full answer...
With 5 holes, you most likely have Westin nerf bars. I recommend the Replacement Step Pad for Westin Platinum Series Oval Nerf Bars - Front/Rear - Qty 1 # 21-0001 which are 24 inches by 4 inches. view full answer...
We do indeed offer a replacement vinyl cover for your 2001 Ford Ranger with the 6 Foot Stepside bed. The part # is # EX1600 is the replacement for your Extang Tonneau # EX2600 view full answer...
We don't carry Truck Champ products, so I couldn't say with any certainty if the # 23-0001 replacement step pad you looked at would work for you. I can, however provide the dimensions of the pad and show you a photo with the pin spacing so you can measure to determine if it'll work for you.
The Westin # 23-0001 replacement step pad measures 21 inches long by 3 inches wide. The pad uses 5 mounting pins on the back, spaced as shown in the photo.
If the provided dimensions don't match up,... view full answer...
Thank you for all of the information!
The correct replacement tarp for the TruXedo Lo Pro # TX597601 on your 2009 Ford F-150 with the 5-1/2' bed is part # TX577601-CVR.
If you have any other pieces that need to be replaced please let me know and I'd be happy to assist! view full answer...
Go To Results